Siting & Delivery Requirements

A suitable reinforced concrete base must be installed before the lodge arrives. The base must:

• Be level, solid and capable of supporting the lodge's overall weight
• Be correctly sized for the dimensions and layout of the lodge
• Be fully cured and ready before the agreed delivery date
• Provide adequate drainage around the lodge
• Allow sufficient space for siting, levelling and future maintenance

The required base specification may vary depending on the lodge size, ground conditions and site location. We recommend obtaining professional advice from a suitably qualified groundworks contractor before work begins.

The customer is responsible for ensuring there is suitable access for the transport vehicle, lodge sections, crane or specialist siting equipment where required. Access routes should be checked for width, height, overhead cables, trees, gates, tight turns and ground conditions before delivery is arranged.

• Any necessary planning permission, site licences, groundworks, access preparation or local authority approval must be in place before delivery.

Our experienced team will coordinate the delivery and siting of your lodge. Once positioned on the prepared base, the lodge will be carefully levelled, joined where applicable and inspected to confirm that it has been installed correctly.

• A final post-siting inspection will be completed by S&S Luxury Park Homes before the lodge is handed over for connection to the site services.

Your lodge will arrive turnkey ready, with the interior completed to the agreed specification. This includes the fitted kitchen, bathrooms, internal plumbing, electrical installation, heating, flooring, decoration, fixtures and appliances included within your order.

• "Turnkey ready" means that the lodge itself is fully finished; however, it does not include connecting the lodge to the external site services.

Following our final siting checks and approval, the customer must arrange for the lodge to be connected to the site's:

• Mains water supply
• Waste and drainage system
• Electricity supply
• Gas or LPG supply, where applicable
• Any other external utility services required

All final plumbing and electrical connections must be completed and certified by appropriately qualified and registered contractors. The lodge should not be occupied or used until all utility connections have been completed, tested and confirmed as safe. S&S Luxury Park Homes will provide the relevant connection-point information required by your appointed contractors. If you are unsure about any aspect of the base, access requirements or service connections, please contact our team before beginning any site preparation work.